drop ceiling track covers
-
...
...
Links
Auto Oil seal structure
There are many different materials used to manufacture oil seals.
Some aspects to consider when selecting this component are:
Oil seals come in a vast range of materials and compounds. Even older materials, such leather, are still used today. Nitrile is among the most common materials for oil seals but is slowly losing ground to PTFE, which is gaining popularity due to its effectiveness in high-speed applications.
Rubber covered
The skeleton oil seal structure consists of three parts: the oil seal body, the reinforced skeleton and the self-tightening coil spring. The sealing body is divided into bottom, waist frame oil seal structure diagram, cutting edge and sealing lip according to different parts. Generally, the inner diameter of the skeleton oil seal in the free state is smaller than the shaft diameter, that is, it has a certain interference. Therefore, after the oil seal is installed on the oil seal seat and the shaft, the pressure of the oil seal edge and the contraction force of the self-tightening coil spring will produce a certain radial tightening force on the shaft. After a period of operation, the pressure will rapidly decrease or even disappear. , Therefore, adding a spring can compensate for the self-tightening force of the oil seal at any time.
Figure 2.9. Metal to rubber bonded seal
The most common and economical material within the sealing industry, Nitrile, is used in many oil applications, the automotive sector for aircraft fuel applications, military and marine applications, and more.